ADSL Router 4-ports w/NAT Firewall w/Wireless LAN

Aztech ADSL 2/2+ READY WIRELESS LAN 802.11g 4 PORT ETHERNET USB COMBO ROUTER (DSL 600EW)

The Aztech DSL600EW ADSL2/2+ Ready Wireless LAN 802.11g 4 Port Ethernet USB Combo Routers uses Texas Instruments AR7W Chipset solution that fully complies to ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL600EW also provides future proof functionality with higher data transmission rates with ADSL2, ADSL2+, Extended Reach-ADSL support.

Targeted at the residential and SOHO users, it is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a combined ADSL2/2+ Ready Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Switch, USB port, high speed 54Mbps IEEE802.11b/g Wireless LAN Access point and true firewall capability functionality.

Security is provided via a double Stateful Packet Inspection and NAT based firewall and Hardware accelerated AES/WEP/WPA based encryption/MAC Address Filtering for Wireless links. VPN Passthrough and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant ADSL2, ADSL2+, RE-ADSL Ready Rate Adaptive modem at 32 Kbps steps Dynamic Adaptive Equalisation to improve Carrier's service area Bridge Tap Mitigation support ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Multiple PVC up to 8 support Spectral compatibility with POTS F5 OAM Loopback/Send and Receive

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support RFC2225/RFC1577 Classical IP Support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT) Port Mapping/Forwarding Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support Single Session IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand

WLAN Support

IEEE 802.11, 802.11b and 802.11g compliant Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm) Standard Supports 802.11b and 802.11g simultaneously Support seamless WLAN roaming Frequency Band : • 2412 MHz - 2462 MHz (North America/FCC) • 2412 MHz - 2472 MHz (ETSI/Europe) • 2412 MHz - 2484 MHz (Japan) • 2457 MHz - 2472 MHz (France) • 2457 MHz - 2462 MHz (Spain) Support Direct Sequence Spread Spectrum (DSSS) technology Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK Wireless Media Access Protocol- CSMA/CA with ACK Dynamic Rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s Operating Range of >300 Meters (Open Air)

Management Support

Web Based HTTP management GUI TFTP/FTP Support for Firmware Upgrade Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Diagnostic Test (DSL, OAM, Network, Ping Test) Telnet/CLI (Read Only) Syslog Support Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem

HARDWARE

Texas Instrument TNETD7300 Single Chip Network Processor/AFE/Line Driver Chipset Marvell 88E6060-RCJ 5+1 Port 10/100 MAC/PHY Switch (Support Auto MDI/MDIx) Texas Instrument TNETW1130 based IEEE802.11b/g MiniPCI Daughter Board USB 1.1 Compliant 4 MB Flash ROM 16 MB SDRAM Dying Gasp Support ITU K.21 Support

PLATFORM SUPPORT

For Ethernet and Wireless LAN • OS Independent for Ethernet For USB • Windows 98SE • Windows ME • Windows 2000 • Windows XP • Windows 2003

POWER REQUIREMENTS

Input Voltage : 9V DC +/- 10% Input Current : 1.0A

LED Indicators

1 x Internet Status LED (Green LED) 1 x Power LED (Green and Red LED) 1 x DSL Status LED (Green, Red and Amber) LED 4 x Ethernet Link Status LED (Green LED) 1 x USB Link Status LED (Green LED) 1 x Wireless LAN Link/Activity Status (Green) LED

External Connectors

1 x RJ-11 Telephone socket for ADSL line 1 x RJ-11 Telephone socket (FXS) 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx) 1 x USB 1.1 Type B interface 1 x DC Jack for Power Input 1 x Factory Default Reset Button 1 x On/Off Power Switch 1 x Co-axial Connector for Detachable 180 ° Rotate-able 2.4Ghz 3 dBi Antenna

Measurements

Dimension : 176.5 (L) x 118.9 (W) x 37.9 (H) mm Weight : Approx. 450 g